Emulsion Anionic – Rapid Setting

Bitumen Emulsion Anionic Rapid Setting RS-1, RS-1H and RS-2

Chemical surface-active agents, which serve as Emulsifiers, are classified by the electrochemical charge that is attained when they dissociate in a water solution. In the case of ANIONIC EMULSIONS, the chemical charge is NEGATIVE. The chemical type and quantity of surface-active agent used in the manufacturing process governs the process in which the resulting asphalt emulsion can be used.

HY FZE has the capability to Export and Supply the different Grades of Emulsion Bitumen Anionic Rapid Setting RS-1, RS-1H and RS-2 in compliance with National and International standards.

Emulsion Bitumen Anionic Rapid Setting RS-1, RS-1H and RS-2 Specifications

Emulsion Anionic Bitumen Rapid Setting RS-1, RS-1H and RS-2 Specifications
PROPERTIES	RS-1	RS-1H	RS-2
Tests on Emulsion	min-max	min-max	min-max
Viscosity, SF, 25°C, SFs	20 – 100	20 – 100
Viscosity, SF, 50°C, SFs			75 – 300
Sieve Test, #20, %	0.1 max	0.1 max	0.1 max
Settlement, 5 days, %	3 max		3 max
Storage Stability, 24h, %		1 max
Demulsibility, 35ml CaCl2 0.02N, %	60 min	60 min	60 min
Cement Mixing Test, %
Coating Test, %
Residue by Distillation, 260°C, %	55 min	55 min	60 min
Oil Portion of Distillate (V/M), %
Particle Charge	( – )	( – )	( – )
Tests on Residue
Penetration, 25°C, dmm	100 – 200	40 – 90	100 – 200
Solubility in TCE, %	97.5 min	97.5 min	97.5 min
Ash Content, % mass of res
Ductility, 25°C, cm	60 min		60 min
Float Test, 60°C, sec