Emulsion Anionic – Medium Setting

Bitumen Emulsion Anionic Medium Setting MS-1, MS-2, MS-4 and MS-5

Chemical surface-active agents, which serve as Emulsifiers, are classified by the electrochemical charge that is attained when they dissociate in a water solution. In the case of ANIONIC EMULSIONS, the chemical charge is NEGATIVE. The chemical type and quantity of surface-active agent used in the manufacturing process governs the process in which the resulting asphalt emulsion can be used.

HY FZE has the capability to Export and Supply the different Grades of Emulsion Bitumen Anionic Medium Setting MS-1, MS-2, MS-4 and MS-5 in compliance with National and International standards.

Emulsion Bitumen Anionic Medium Setting MS-1, MS-2, MS-4 and MS-5 Specifications

Emulsion Anionic Bitumen Medium Setting MS-1, MS-2, MS-4 and MS-5 Specifications
PROPERTIES	MS-1	MS-2	MS-4	MS-5
Tests on Emulsion	min-max	min-max	min-max	min-max
Viscosity, SF, 25°C, SFs	20 – 60		50 – 500	50 – 500
Viscosity, SF, 50°C, SFs		35 – 400
Sieve Test, #20, %	0.1 max	0.1 max	0.1 max	0.1 max
Settlement, 5 days, %	3 max	3 max
Storage Stability, 24h, %			1 max	1 max
Demulsibility, 35ml CaCl2 0.02N, %
Cement Mixing Test, %
Coating Test, %	80 min	80 min	75 min	75 min
Residue by Distillation, 260°C, %	55 min	65 min	65 min	65 min
Oil Portion of Distillate (V/M), %		10 max	2 – 7	0 – 3
Particle Charge	( – )	( – )	( – )	( – )
Tests on Residue
Penetration, 25°C, dmm	100 – 200	100 – 250	200 min	150 – 250
Solubility in TCE, %	97.5 min	97.5 min	97.5 min	97.5 min
Ash Content, % mass of res
Ductility, 25°C, cm	40 min	40 min
Float Test, 60°C, sec			50 min	100 min